LeafSlugger Micro
Micromesh Gutter Guards in Enterprise, AL
Fine debris out. Water moving.
LeafSlugger Micro micromesh guards for Enterprise and Wiregrass homeowners who want a cleaner roofline and less time worrying about what is sitting in the gutter.
Exclusive Licensed LeafSlugger Dealer & Installer
Exclusive LeafSlugger dealer and installer for our authorized service area.
Crown & Cross Exteriors is the exclusive licensed LeafSlugger dealer and installer for LeafSlugger Micro micromesh guards in our authorized service area. LeafSlugger dealers are territory-based, so Crown & Cross is the authorized dealer and installer for the area assigned to us.
LeafSlugger Micro is designed around a fine stainless steel mesh that lets rainwater enter while helping keep out the small material that can collect in an open gutter. It is a practical choice for homes surrounded by pine needles, tree helicopters, leaves, and the everyday debris carried by wind and rain.
Ongoing service
Designed to perform, backed by ongoing service.
The heavy debris shown on these MicroMesh guards was intentionally placed there to demonstrate how effectively water can continue to flow through the mesh, even when significant debris is present.
Under normal conditions, wind and rain naturally help move leaves, pine needles, and other debris off the surface of the guards. Occasionally, some debris may collect and require removal.
That is where our commitment goes beyond the installation.
Homeowners and commercial clients who have MicroMesh gutter guards installed by Crown & Cross Exteriors receive unlimited complimentary debris blow-off service for their guards, at no additional charge.
If debris accumulates on the surface of your guards, simply contact us and we will take care of it. It is one more way we stand behind the systems we install and help keep them performing as intended.
Diagram key
What each green callout shows.
The green lines on the LeafSlugger Micro diagram point to the parts that work together to protect the gutter.
01
30-weight micro mesh
Fine surgical stainless steel mesh helps keep small debris, including pine needles and seed pods, out of the gutter channel.
02
.019 aluminum frame
A high-grade aluminum frame gives the guard a firm, low-profile structure along the roofline.
03
Louvered aluminum base
The aluminum base beneath the mesh adds support and stability to the guard system.
04
Fascia-mounted fit
The system is mounted at the fascia so the guard can work as part of the gutter and roofline.
A better roofline routine
Gutter protection should support the system already on your home.
Small debris is the real test.
Big leaves are easy to notice. Pine needles, seed pods, roof grit, and shingle granules are the material that can quietly gather over time. The fine LeafSlugger Micro mesh is made to address those smaller pieces before they settle into the gutter channel.
Water still needs a clear route.
Gutters are there to collect rainwater and guide it to the downspouts. The goal of a micromesh guard is not to replace that system. It helps keep the top of the gutter clear so rain can move into the gutter and continue through the drainage path.
The visible finish matters.
A gutter guard is part of the home’s exterior. LeafSlugger Micro is designed to be low-profile at ground level, and the available white, black, and brown options give you a practical way to pair the system with the existing exterior.
Why micromesh
Protection starts before a clog can build.
When leaves, needles, and roof grit settle into a gutter, the water path gets less reliable. That can mean overflow around the roofline and more maintenance than a homeowner planned on. A properly fitted micromesh guard helps keep the channel clear while the gutter does the job it was made to do.
The guard is mounted to the fascia, and the aluminum base beneath the mesh adds stability to the system. It is designed to sit low-profile on the roofline, rather than becoming a visual distraction from the curb.
A clear recommendation
We start with your home, not a one-size-fits-all answer.
Look at the roofline
We consider the gutter condition, roof edge, drainage needs, and the debris your property sees.
Talk through the fit
You get a straightforward conversation about whether LeafSlugger Micro is the right addition to your gutter system.
Install with care
Our local crew fits the system to your home and leaves you with a cleaner, more protected roofline.
Frequently asked questions
About LeafSlugger Micro guards.
What is LeafSlugger Micro made from?
LeafSlugger Micro uses 30-weight surgical stainless steel micro mesh, a high-grade aluminum frame, and a louvered aluminum base.
Will it work with small debris?
The fine micromesh is made for the small material that commonly creates gutter maintenance problems, including pine needles and tree helicopters.
Can the guard match my home?
LeafSlugger Micro is available in white, black, and brown, giving homeowners options that can suit the surrounding roofline and exterior.
Do you install other gutter guards?
No. Crown & Cross Exteriors exclusively installs LeafSlugger Micro micromesh guards as the authorized LeafSlugger dealer and installer for our assigned service area.
Can guards be added to an existing gutter system?
That depends on the condition and layout of the gutter system already on your home. During an estimate, we look at the roofline and gutter condition before recommending the right next step.
Why does the installer matter?
The guard needs to work as part of the roofline and gutter system, not as a separate piece added without a plan. Our team focuses on the fit, the fascia-mounted installation, and the water path around your property.
A cleaner next step
See whether micromesh guards fit your home.
Tell us about your gutter concerns and we will take a look at the roofline with you.